Haul Rifles and Range Gear with Low-Cost Welding Cart
The 2022 Berger Southwest Nationals kicks off later this week at the Ben Avery Shooting Facility in Phoenix, AZ. The match runs February 9-13, 2022*, starting with the mid-range competition for F-Class and High Power (sling) rifles, followed by long-range matches. Here’s an inexpensive cart that can help haul gear for major matches where you’re moving from one firing berm to another over the course of a day.
High Power and F-Class shooters have a ton of gear they need to carry out to the firing lines. (These photos were taken at the Berger SWN). To do the hauling, you can certainly purchase a factory-made, purpose-built cart that folds up and has all the bells and whistles. The Creedmoor Sports CRC-1 (photo right) is a proven, quality product that works great. You’ll find these used by top shooters at Camp Perry. But the Creedmoor CRC-1 cart costs $499.95.
For a fraction of that price ($69.99), plus a few dollars more for do-it-yourself enhancements, you can have a heavy-duty cart that will haul all your gear just fine, though it doesn’t fold up. In the top photo is a Harbor Freight Welding Cart we saw at the Berger Southwest Nationals. This rig is carrying a rifle in hard gun case, bipod, folding chair, shooting mat, tripod, spotting scope, rear sand-bag, and ammo box — that’s a lot of gear!
Check out the Harbor Freight Welding Cart, item #65939. This cart is available now for just $69.99. Overall size is 29-1/2″ L x 20″ W x 49″ H, and width between side rails is 18″. The wheels (with tires) are 20 3/4″ in diameter for smooth rolling. Consider that, if you made your own cart from scratch you could easily pay $30.00 or more just for the large-diameter wheels and axle. Do note — this cart has air-filled tires. Be sure to inflate before you go to the Range!
As sold, the Harbor Freight Welding Cart can benefit from upgrades for range use. But with a few bungee cords (and some creativity), the cart can be adapted pretty easily to hauling your gun gear. If you want to enhance the basic cart, it’s easy to add plastic side-panels on the bottom unit, and fit a barrel-holding system on the cross-tube. This ensures rifles and gear won’t flop forward. (A small piece of wood under the bottom panel provides a bit of extra lift that will keep the bottom plate out of the dirt and gravel.)
* The Berger SW Nationals normally concludes on a Sunday, but the official schedule includes Monday, February 14 in case there is a lost day due to weather.
Similar Posts:
- Bargain $60 Welding Cart Works as High-Capacity Gear Hauler
- Cheap Tricks: Haul Your Gear with $60.00 Welding Cart
- Bargain Hauler — Transport Gear with $55 Welding Cart
- Budget Hauler — Transport Your Gear with $56 Welding Cart
- Budget-Priced Range Cart Does the Job for under $50.00
Share the post "Haul Rifles and Range Gear with Low-Cost Welding Cart"
Tags: Berger SW Nationals, Gear Hauler, Harbor Freight, Range Cart, Welding Cart
