Texas is a haven for hunters and shooting enthusiasts, so we’re not surprised that the Lone Star State leads the nation in online ammo sales. However, you might be surprised that California, with its liberal, anti-gun politicians, is a close second. Yes, California was the second-most active source of online ammo purchases in 2013, according to statistics from LuckyGunner.com, one of the nation’s leading online ammo vendors. In fact, California was number one in 2012. For 2013, Texas edged California for the top spot, followed by Florida, Michigan, and (surprise) New York.
More Online Ammo Buyers are Using Mobile Devices (Tablets and Smart Phones)
More and more people are connecting to the internet via mobile devices. And, apparently, they are using those devices to shop for ammo. Luckygunner.com saw a significant increase in orders from mobile devices in 2013. Fully 22.7% of Luckygunner’s visits were made via mobile devices in 2013, compared to 18.8% in the preceding year. AccurateShooter.com has seen a similar rise in the number of visitors connecting to our site via mobile devices (particularly smartphones).
Share the post "Texas and California Lead Online Ammo Sales"
There is an excellent article about Mirage on the South Texas Marksmanship Training Center (STMTC) website. This article explains what causes mirage and how mirage can move the perceived aiming point on your target. Most importantly, the article explains, in considerable detail, how you can “read” mirage to discern wind speeds and wind directions. With simple but effective graphic illustrations, this is one of the best explanations of mirage (and mirage reading) we have found on the internet. This is a “must-read” for any serious competitive shooter. Here is a brief sample from the article, along with an illustration. NOTE: the full article is six times longer and has 8 diagrams.
The term “mirage” as used by the shooter does not refer to a true mirage, but to heat waves and the refraction of light as it is bent passing through air layers of different density. Light which passes obliquely from one wind medium to another it undergoes an abrupt change in direction, whenever its velocity in the second medium is different from the velocity in the first wind medium; the shooter will see a “mirage”.
The density of air, and therefore its refraction, varies with its temperature. A condition of cool air overlaying warm air next to the ground is the cause of heat waves or “mirage”. The warm air, having a lower index of refraction, is mixed with the cooler air above by convection, irregularly bending the light transmitting the target image to the shooter’s eye. Figure 1 shows (greatly exaggerated) the vertical displacement of the target image by heat waves.
Heat waves are easily seen with the unaided eye on a hot, bright day and can be seen with spotting scope on all but the coldest days. To observe heat waves, the scope should be focused on a point about midway to the target. This will cause the target to appear slightly out of focus, but since the high power rifle shooter generally does not try to spot bullet holes, the lack in target clarity is more than compensated by clarity of the heat waves.
Mirage Is Your Friend
While hot days with lots of mirage can be frustrating, mirage can reveal how the wind is flowing (and changing). If you learn how to recognize and read mirage patterns, you can use that information to shoot higher scores. That’s why many leading long-range shooters tell us: “Mirage is your friend.” As the STMTC article explains: “A mirage condition is not a handicap, since it offers a very accurate method of perceiving small wind changes[.]”
Story tip from Boyd Allen. We welcome reader submissions.
Gov. Rick Perry of Texas and Gov. Dennis Daugaard of South Dakota visited Connecticut last week. The two Governors hoped to recruit manufacturers to re-locate operations to their more business-friendly states. Connecticut firearms makers are high on the list of businesses both Perry and Daugaard seek to bring to their respective states. Gov. Perry wants Connecticut gunmakers to relocate to the Lone Star State, while Gov. Daugaard hopes South Dakota can attract these enterprises.
Larry Keane, Senior vice president and general counsel for the National Shooting Sports Foundation, provides a perspective on the recruiting effort. Keane suggests that economic growth in Connecticut is being stymied by official state policies. And Connecticut is no friend of the gun business, though firearms production has been one of Connecticut’s few growth industries in recent years:
The economic report card for the State of Connecticut is in and the results are not good.
The Bureau of Economic Analysis reports that Connecticut was last in the nation in economic growth in 2012, the only state where the combined value of goods and services produced (GDP) was lower than in 2011. In fact, total state GDP fell a quarter of a billion dollars last year, the same amount it fell in 2011.
On the heels of that report, the Manufacturing Alliance of Connecticut released the results of a survey that revealed Connecticut manufacturers predict a bleak outlook for the state’s economy and the health of their industries. The survey reported that a majority of the state’s manufacturers have been recruited to expand or relocate to another state and that they would consider doing so, most citing “government attitude” as the reason.
Connecticut’s firearms and components manufacturers have been the rare exception to the state’s dismal economic performance in recent years. Colt, Mossberg, Stag Arms, Ammunition Storage Components, to name four such companies, have added hundreds of jobs in recent years and, as a result, have contributed more in local and state taxes, even as other industries have cut back and moved facilities and jobs out of state.
We see a direct connection between the state’s nation-trailing GDP performance and the attitude of state government…. Gov. Perry understands all this. So he is coming to Connecticut. So too, is South Dakota Gov. Dennis Daugaard, who next week will also be recruiting these same manufacturers for his state. — Commentary by Larry Keane
Share the post "Texas and S. Dakota Governors Go East to Recruit Gun Makers"
The 2013 NRA Annual Meetings & Exhibits has concluded, 70,000 attendees are headed home while some 550 exhibitors pack up their wares. Attendance at the NRA Show was strong, and the overall mood of NRA’s rank and file was positive. Jim Shepard of the Shooting Wire observed: “Outside the 142nd edition of the NRA Annual Meetings & Exhibits in Houston, things were calm and peaceful. Inside, however, it was a booming expo and a series of meetings that were anything but conciliatory. In fact, the mood of attendees might best be described as encouraged by the recent defeats of the latest round of anti-gun legislation in Washington.”
NRA Show Highlights Day Two
One of the most popular sections of the show was the indoor Airgun range operated by Pyramyd Air. Visitors of all ages could enjoy trying their marksmanship skills at both reactive and paper targets.
NRA Show Highlights Day Three
Next year’s NRA Annual Meetings & Exhibits will be held April 25-27 in Indianapolis, Indiana.
AmmoLand Shooting Sports News Service, in partnership with the National Rifle Association, will be broadcasting live video coverage of important events from the 2013 NRA Annual Meetings & Exhibits in Houston, Texas.
The streaming will open at 1 p.m. EDT on Friday, May 3rd, with the ILA Leadership Forum, which will be followed that day, at 4 p.m., by NRA News and Cam & Co on the Sportsman Channel.
On Saturday, May 4th, streaming begins at 9:50 a.m. with the NRA members meeting. In the afternoon, there is a special edition of NRA News and Cam & Co, and at 7:20 p.m. is the NRA Stand and Fight Rally. Sunday, May 5th, features the Special NRA News Wrap-Up Show at 10:00 am.
For more information, visit Ammoland.com. If you log to the NRA Meeting Video Feed, hit “refresh” to restart the embedded video player for each new event.
Share the post "Live Video from NRA Annual Meetings on Ammoland.com"
Report by Richard King (King’s Armory, Texas; ‘Kings X’ on our Forum)
With all the talk from Vince Bottomley in the April issue of Target Shooter about aluminum stocks, I thought you might like to see my latest project. This is my personal gun, built the way I wanted it. I know it’s radical and some may not care for it. But it works.
This is pretty much an all-aluminum rifle. The action is a Kelbly F-Class with a Shilen stainless steel competition trigger. The scope is a 1″-tube Leupold 36X with a Tucker Conversion set in Jewell spherical bearing rings. The .223 barrel is Pac-Nor 3-groove, 1:6.5″-twist mounted in a “V”-type barrel block. The bipod has vertical adjustment only via a dovetail slide activated by a stick handle. It works like a joy-stick, but for vertical only. I adjust for windage by moving the rear sandbag.
The 30″ barrel is 1.250″ in diameter. With the barrel block forward, the vibrations should be at a low frequency. Instead of one long rod whipping, I now have two short rods (barrel haves) being dampened. This is my fourth barrel block gun. They work, but so does a good pillar-bedded action. I just do stuff a little different.
The vertical “keel” down the bottom of the stock stops the “spring” of a flat-bar stock. There is little, if any, noticeable flex before or during recoil. The long length of the stock, the fat barrel, and the forward-mounted barrel block work together to keep the gun from rising off the ground. BUT, remember this is a .223 Rem rifle. A .308 Win version might act very differently. I may try a .308-barreled action soon, just to see what happens. But I will stick with the .223 Rem as my choice for match shooting.
The offset scope idea came from a benchrest “rail” gun. In truth, the whole concept came from a rail gun — just adapted to being shot off a bipod. Sure it isn’t directly over the bore. It is about 1.5″ over to the left. So if you want the scope to be zeroed on the center of the target, you have to adjust for the offset. At 100 yards that is 1.5 MOA. But at 300 it is only 0.5 MOA, at 600 only a ¼-MOA, and at 1000 about 1 click on my scope.
What the offset DOES do for me is eliminate any cheek pressure. My cheek never touches the stock. Since this is only a .223 Rem, I don’t put and shoulder pressure behind it. And I don’t have a pistol grip to hang on to, but I do put my thumb behind the trigger guard and “pinch” the two-ounce trigger.
The offset scope placement could interfere with loading a dual-port action from the left. That’s not a problem for me as I set my spotting scope up on the left side very close to the rifle. I have plenty of time to reload from the right side while the target is in the pits being scored.
Again — this is my rifle. It is designed for my style of shooting. It is not meant to be a universal “fit all” for the general public. However, I will say the design is adaptable. I can easily convert the system to run in F-Open Class. I would drop a big-bore barreled action into the “V” block, slide on a heavier pre-zeroed scope and rings, add plates on the sides up front to bring the width to 3”, and maybe a recoil pad. It might be interesting to offset the wings up from to counter torque of the big bullets. But I would also have to offset the rear bag rider to get the gun to recoil straight back.
How the Gun Performs
I have had “T” to the range only twice for load development. It groups like my present barrel-blocked 223 F-TR gun. But it’s much easier to shoot and it only moves about 3/4” — straight back. I tried to build am omni-directional joy-stick bipod but I could not get all the side-to-side wiggle out of it. So I have set it up so it only moves up and down (horizontal movement is locked-out). As it works now, the joystick on the bipod lets me set elevation on the target quickly (with up/down adjustment). Then, to adjust for windage, I slide my rear bag side-to-side as needed. Once set, I just tickle the trigger and smile.
Gun Handling — Shoot It Like a Bench-Gun
I basically shoot the gun with no cheek or body contact. I don’t grip it, other than maybe a pinch on the trigger guard. The scope was offset to the left to help the shooter move off the gun and avoid the possibility of head/cheek contact with the stock.
Listen to Richard King Explain How He Shoots his ‘Texas-T’ Rifle:
[haiku url=”http://accurateshooter.net/Video/RichKingTalks.mp3″ Title=”Richard King Talks”]
CLICK PHOTOS to See Big Size
Share the post "“Texas T” — Radical, All-Metal F-TR Rifle from Richard King"
Mark your calendars for May 3-5, 2013. Those are the dates for the NRA Annual Meetings and Exhibits, to be held this year in Houston, Texas.
As ever, there will be plenty to see and do at the NRA National Meetings/Exhibits. There will be seminars, celebrity appearances, and priceless collections of firearms. Virtually all the major gunmakers in the country should have their latest products on display. In fact, there will be over 550 exhibitors whose displays will cover 400,000 square feet of exhibit hall space. In addition to fireams, you can see knives, wildlife art, shooting accessories, hunting gear, ATVs, and much more. You’ll even find an airgun range on site where you can shoot air rifles provided by Pyramyd Air.
Photo from Previous NRA Annual Meeting and Exhibits.
Share the post "NRA Annual Meetings and Exhibits: May 3-5 in Houston, Texas"
Chris Kyle, highly-decorated U.S. Navy SEAL (retired) and author of the best-selling book American Sniper: an Autobiography was shot dead yesterday at a Texas gun range where he was helping other veterans. The suspected shooter was Eddie Ray Routh, 25, a former marine who was suffering from PTSD. Also killed by Routh was Kyle’s friend Chad Littlefield. Read Related Story from KHOU.com.
Kyle served four tours-of-duty in the Middle East. Kyle served in every major battle in Operation Iraqi Freedom. While deployed in Iraq, Kyle was so feared that insurgents named him Al-Shaitan Ramad (“The Devil of Rahmadi”), and put a $20,000 bounty on his head — later increased to $80,000. In 2008 outside Sadr City, Kyle made a 2,100-yard shot, killing an insurgent who was armed with a rocket launcher. Kyle was using a PGM 338 rifle chambered in .338 Lapua Magnum.
During his military service, Kyle was awarded two silver stars, five bronze stars, and Navy and Marine Corps Commendation and Achievement Medals. Following his combat deployments, Kyle became chief instructor for training Naval Special Warfare Sniper and Counter-Sniper teams, and he authored the Naval Special Warfare Sniper Doctrine, the first Navy SEAL sniper manual. Kyle is survived by his wife and two children.
Share the post "Former U.S. Navy SEAL Sniper Chris Kyle Killed in Texas"
How would you like to be a salaried gunsmith for a major gun-maker’s USA operation? Here’s your opportunity. Blaser USA is looking to hire a gunsmith for its San Antonio, Texas sales and service center.
Candidates must have completed a recognized gunsmithing course, have “excellent communication skills”, be able to work in a “fast-paced” team-oriented business environment, and be able to work (on location) at regional and national shooting events. Duties include general gunsmithing, customer service work, and the following specific tasks:
Finish assembly of rifles and shotguns.
Inspects first piece samples from vendors.
Assembles firearms in accordance with customer specifications.
Repairs firearms for customers, sponsored shooters, and journalists.
Minor stock repair and wood-working.
Aligns sights/scopes and conducts test firings.
Documents problems on customer returns as required.
Inspects and sets out parts for repairs or product updates.
How to Apply
If you are interested in this position,
forward your résumé to:
Blaser USA Inc.
Laura Aldana
403 East Ramsey Ste. 301
San Antonio, TX 78216
email: info [at] blaser-usa.com
Story Tip by Edlongrange. We welcome reader submissions.
Share the post "Blaser USA Hiring General Gunsmith in Texas"
Did you know that Shilen Rifles Inc. offers barreled actions and complete rifles? And that Shilen offers a Savage-style, barrel-nut system for its Rem-clone actions? Starting in 2010, after a hiatus of nearly twenty years, Shilen returned to the rifle manufacturing market. After several years of development, Shilen now offers custom actions ($950.00), barreled custom actions with triggers ($1500.00), and complete rifles ($3200.00 and up).
The new Shilen custom actions are CNC-milled from high-grade stainless steel. Two types are offered — the multi-shot DGR (Repeater) or the single-shot DGV (Varminter) action. Both actions will be offered in most common bolt faces and both right-hand and left-hand actions are immediately available. The DGR and DGV actions have a 1.350″ diameter with 8-40 scope base mounting screw holes, and an 0.300″ pinned recoil lug. The spiral-fluted bolts feature a floating bolt head with an interchangeable bolt handle knob. These actions feature a footprint similar to the Remington Model 700. Both DGR and DGV actions will accept many aftermarket components crafted for Rem-700 style actions, including triggers and bottom metal.
Barreled Actions with Barrel-Nut System for Easy Barrel Exchanges
Along with the stand-alone DGR and DGV actions, Shilen is offering barreled action assemblies, chambered and ready to drop into Rem 700-inletted stocks. The actions are fitted with Shilen match-grade barrels and Shilen triggers. The barrels feature a 1-1/16″x20 barrel thread and are attached to the action by a barrel nut. This Savage-style barrel nut system simplifies headspacing, allowing easy swapping from one barrel to another. With the simple barrel-exchange procedure, you can shoot multiple chamberings with a single action/rifle. For example, shooters can change from a .223 Remington to a .204 Ruger or a .22-250 to a 6mm BR in a matter of minutes.
Complete Rifles with McMillan Stocks
With Shilen’s complete rifles, buyers can choose their chambering, and select barrel and stock configuration. Shooters can choose between a sporter weight wood stock or a variety of McMillan fiberglass stocks. With all complete rifles, the entire package is delivered in a quality gun case and Shilen even includes table mat, cleaning rod, bore guide, jag, bore brush, and cleaning patches.
There has been a strong demand for Shilen’s barreled actions and complete rifles. Accordingly, the waiting period is two to four months for complete rifles, a bit less for barreled actions. But some chamberings can be had much more quickly (if Shilen has a pre-chambered barrel in current inventory). If you’re interested, call (972) 875-5318 or email comments@shilen.com for more info.
Share the post "Shilen Custom Rem 700 Clone Actions and Complete Rifles with Savage-Style Barrel Nut System"
A while back, we featured the East Texas Benchrest Shoot-out in Huntsville, TX. That match was co-sponsored by S&S Precision Rifles of Argyle, Texas. In the video below, the folks at S&S put together some tack-drivers for their customers. There are some nice glimpses of bedding work, and barrel finishing. Watch carefully — at the 40-second mark you’ll see a sub-1/4″, 10-shot group that S&S co-owner “Stick” Starks shot at 200 yards with his 6.5×47 Lapua rifle. That’s serious accuracy. Half-way through the video, Stick offers advice for shooters looking for a super-accurate fun gun for club shoots: “If you want to shoot [at] 100 and 200 yards, I’d get me a 6BR or a 30 BR. It would be the most fun gun you ever had… and the barrel will probably last three or four thousand rounds.” If you want a gun to shoot at primarily 500-600 yards, Stick recommends the 6.5×47 Lapua chambering. He told us: “Run it with the Berger 130s and Hodgdon H4350 powder. That H4350 works great with the 130 Bergers.”
Share the post "S&S Precision — Building Tack-Drivers, Texas-Style"
Texas stock-maker Wayne Young has created an innovative modular stock. The fore-end side-plates bolt on to an aluminum sub-chassis so you can alter the width, or run an offset on either side of center. You can transform the stock from 3″ wide to 5″ wide in a couple minutes. Or, if you want to experiment with offset (i.e. having more fore-end width on one side of the barrel than the other side), you can simply remove a few bolts, and stack up the sideplates on one side.
The ability to quickly (and inexpensively) transform a stock from 3″ wide to 5″ wide is a definite plus for shooters who want to use the same rig in both F-Class and benchrest. You can run your rifle at max-legal 3″ width for F-Class, then bolt on additional fore-end “wings” to run at 5″ for bench competition. The 5″-wide stocks are now legal for 600-yard and 1000-yard benchrest, at both IBS and NBRSA registered matches. Those folks who have tried out 5″-wide stocks on Light Guns have been impressed with the results. The extra width stabilizes the rifle on the bags, reducing perceived twist (torquing) and hop. There is less “Rocking and Rolling”. With the gun torquing less, the tracking during recoil normally shows an improvement as well. (But we should say that, even with the standard 3″ width, these stocks track great.)
Video Demonstrates Superior Tracking
How does a Wayne Young stock track? Straight and true — with virtually no hop. You can see for yourself. In the video below, Wayne shoots a test rifle chambered in .284 Winchester, a popular F-Class cartridge. The load is a 175gr Berger XLD bullet pushed at 3010 fps by Reloder 17 powder. That’s a stout, fast load — the recoil force easily meets or exceeds a typical F-Open match load. To better demonstrate the gun’s handling characteristics, Wayne deliberately shoots the gun free-recoil style — without gripping hard or shouldering the stock*. As you can see, the gun recoils straight back. The forearm and buttstock also slide perfectly in the bags, without “grabbing”. (Note: In the video, the rifle’s front bag-rider section is aluminum without polymer “wings”. This particular gun was built with a wider aluminum channel to fit a large-diameter, straight-contour barrel).
Stock Specifications and Design Features
Finished stocks weigh approximately 7 pounds, 4 ounces. If needed, stocks can be lightened to just under 7 pounds. Overall length is 36″. Length of pull is adjustable from 13 to 13.75 inches with standard two-way adjustable butt pad. The main chassis is machined from billet 6061-T6 (Tee Six) aluminum, while the fore-end chassis section is 6063-T5 (Tee Five). The black side sections, fore-end plates, and buttstock lowers are CNC-machined from high-grade HDPE, a rugged, chemically-resistant polymer.
The chassis for round actions features a “V-Block” seating area. There is a flat configuration for Panda and Stiller flat-bottom actions. With either the round- or flat-bottom configuration, actions can be mounted directly on the 1.25″-square aluminum chassis, using supplied action bolts. (Skim bedding is optional.) No inletting, pillar-installation, or stock finishing (painting) is required. Just bolt your barreled action into the chassis and head to the range.
Wayne’s stocks come with two-way adjustable butt-plate, adjustable cheekpiece, trigger guard, and all fasteners. If you consider all that standard equipment and the fact that Wayne’s gunstocks require no inletting and no finishing, these stocks are attractively priced. Wayne’s F-Open/Benchrest Stock, with 3″ fore-end, costs $499.00 plus $25.00 S/H. There is also a $499.00 F-TR version with a fore-end set up for bipod attachment. (Wayne produces an integral, adjustable and removable F-TR bipod for $75.00.) Add $100.00 extra if you want the aluminum components hard-anodized. With long actions or Savage actions, there is an extra charge to configure the central chassis to fit. For more information visit WaynesGunstocks.com or call (210) 288-3063 from 8:00 am to 4:30 pm Monday through Friday.
* If Wayne was shooting a .284 Win in an F-Class match, he would grip the gun and put some shoulder into it. But for demonstration purposes in the video, Wayne free-recoiled the rig so you can see how well it tracks with no holding or steering by the shooter.
Share the post "Modular Low-Profile Competition Stocks from Wayne Young"
Gov. Rick Perry of Texas and Gov. Dennis Daugaard of South Dakota visited Connecticut last week. The two Governors hoped to recruit manufacturers to re-locate operations to their more business-friendly states. Connecticut firearms makers are high on the list of businesses both Perry and Daugaard seek to bring to their respective states. Gov. Perry wants Connecticut gunmakers to relocate to the Lone Star State, while Gov. Daugaard hopes South Dakota can attract these enterprises.
The offset scope idea came from a benchrest “rail” gun. In truth, the whole concept came from a rail gun — just adapted to being shot off a bipod. Sure it isn’t directly over the bore. It is about 1.5″ over to the left. So if you want the scope to be zeroed on the center of the target, you have to adjust for the offset. At 100 yards that is 1.5 MOA. But at 300 it is only 0.5 MOA, at 600 only a ¼-MOA, and at 1000 about 1 click on my scope.
Mark your calendars for May 3-5, 2013. Those are the dates for the 
How would you like to be a salaried gunsmith for a major gun-maker’s USA operation? Here’s your opportunity. Blaser USA is looking to hire a gunsmith for its San Antonio, Texas sales and service center. 
A while back, we featured the 
