New Accurate LT-32 Powder Coming in January
Midsouth Shooters Supply is now taking advance orders for the new Accurate LT-32 Powder, with initial deliveries expected in January 2013. Price for a 1-lb container is $25.12, while an 8-lb jug runs $190.50. Produced by Western Powders, LT-32 is an extruded powder with extremely small kernels (roughly .0275″). This powder is designed to perform like the legendary “T-322″ powders which worked brilliantly in short-range benchrest cartridges, especially the 6mm PPC. Early testers report that Accurate LT-32 meters superbly and is easy to tune. Western claims LT-32 exhibits very low standard deviation. (Photos below by Speedy Gonzalez).
Speedy Says Accurate LT-32 is Very Promising
Benchrest Hall-of-Famer and noted gunsmith Thomas ‘Speedy’ Gonzalez tested the prototype LT-32 powder from Western Powder earlier this year. Speedy stated: “It pains me to say it, but the new LT-32 out-shot my best lots of [the original] IMR 8208 (T-322)”.
Speedy reports: “I must say that I was quite surprised by the results of my initial testing of the new Western Powder LT-32. Shooting this morning over my Oehler 35P triple screen chronograph yielded some very unexpected results. My best lot of ‘T’ powder continues to exhibit its age as it continues to lose velocity (as it ages). While the new Western LT-32 demonstrated this morning velocities equal to what my old ‘T’ powder used to shoot like 30 years ago.
This new powder goes through the measure like a ball powder. (Note: I have always felt that one of the reasons ‘T’ powder shot so well was due to the fact it measured so well as compared to other powders. This is a definite advantage for us that rely on consistent volume instead of weight.) I will have to shoot it over a season to see if it is as temperature and humidity insensitive as ‘T’, but it looks very promising from what I saw today.
It has yet to be seen if the new LT-32 proves to not be affected by temperature and humidity like the old T-322. But from these short tests it very much mimics my T-322 of old. My ‘T’ powder was always a blessing to me in the fact that when I went to a match I did not have the same problems everyone else was having [i.e. having] to tune up and down over the course of a weekend or week. I got to shoot and concentrate on the conditions instead of making it a tuning competition. It was always kind of funny watching everybody going up and down on their powders trying to accommodate the changes in weather as the days went on. Hopefully this will allow all to become better shooters by being able to concentrate on shooting and not re-turning every time one comes back from the bench.”
Statement from Western Powders
The Accurate LT-32 is an exact copy of the original T-32 manufactured in the same plant and on the same machinery as the original. Lou Murdica has been extensively testing it and he tells us it is the easiest powder to tune that he has seen in 40 years.
According to Lou, the chamber that everybody was using in the 80s will work with this powder. The bullets do not need to be seated way out in order to get more powder in the case. In testing the powder in our Bond Universal receiver against the original “T” powder, SDs were about 30% lower with the new powder versus the “T” powder. Lou and Don Nielson donated 16 lbs. of the original T-32 lot of powder for our quality control and that is what the new powder is shot against.
All of our powders are allowed to deviate +3% to -5% in pressure from the quality control lot except LT-32 which we cut the deviation percentages in half in order to have the best lot to lot consistency in the industry for this powder[.] We developed this powder specifically for the 6mm PPC and it is QC’d in the 6mm PPC.
Western Powders Ballistic Lab
NOTE: Accurate LT-32 should also be available from PowderValleyInc.com in mid-to-late January 2013. Listed Prices are: $24.10 for 1 pound and $182.00 for 8 pounds.
- Effects of Heat on Powder Performance
- Western Powders Offers Updated Reloading Guide Edition 5.0
- Speedy’s Guide to Benchrest Competition
- Speedy's Guide to Short-Range Benchrest
- Dedicated Website for .222 Remington Fans