As an Amazon Associate, this site earns a commission from Amazon sales.











December 30th, 2020

Gundies Awards — Vote for Your Favorite Gun Content Creators

Gundies video social media awards

There is a new Gundies Award program for gun-centric social media content creators. Modeled after the Oscars or Emmys, the Gundies Awards focus on the world of guns, shooting, and hunting. Nominees include those who write about guns on Facebook, who post photos on Instagram, and who make videos for YouTube. The annual community-voted Gundies awards spotlight notable firearms-centric content creators. You can register on Gundies.com and then vote for your favorite “influencers” and video-makers. The last day to vote is 12/31/2020.

Mixed Bag of Nominees — Some Good, Some Laughable
To be honest, some of the female “influencers” are just narcissistic social media queens who trade on their looks. They get dolled up in revealing outfits and lots of make-up for posed shots with guns. And on the male side there are plenty of tattooed tactical poseurs with almost no technical knowledge. But there ARE some solid nominees, especially in the Best Shooter and Best Gun Reviewer categories. We showcase videos from five Gundies candidates below. NOTE: These are NOT the category winners — the actual winners will be decided by popular voting which closes December 31, 2020 (better vote soon).

There are 15 Gundies Categories:
YouTuber of the Year
Best Gun Reviewer
Best Shooter
Best Cross-over Creator
Breakout Creator of the Year
Influencer of the Year
Influencer Turned Entrepreneur
Best Outdoorsman
Most Innovative Content of the Year
Most Influential Female of the Year
Most Influential Male of the Year
Most Creative Content of the Year
Most Entertaining Content Creator
Most Likely to Survive an Apocalypse
Best Gun Store/Shooting Range

1. Gundies Nominee — Mrgunsngear
YouTuber of the Year Category

The Mrrgunsngear Channel has nearly 550,000 subscribers and we know why. This YouTube channel offers a combination of gun-centric content and complimentary reviews of outdoor gear (such as generators, lamps, backpacks, body armor). The host is articulate and a pretty good shooter. He also comments on recent gun law developments, such as the ATF Pistol Brace controversy. Here are four videos that showcase the variety of content from this capable Gundies nominee:


2. Gundies Nominee — Dustin Ellermann
Best Shooter Category

Our friend Dustin Ellermann is a past Top Shot TV Show Champion. He is a very capable shooter who also runs a Christian-focused Camp for kids. Dustin produces multiple videos every month for his Top Shot Dustin YouTube Channel. Here we feature Dustin’s review of the the Volquartsen Summit rimfire rifle. This is a straight-pull bolt rifle available in .22 LR, .17 Mach2 and .17 WSM. Dustin reports: “[The Summit] is extremely accurate as well as a perfect suppressor host.”

3. Gundies Nominee — Caleb Savant (Brownells)
Breakout Creator of the Year Category

While many Gundies nominees have very little technical knowledge of firearms, Brownells Firearm Support Technician Caleb Savant is the exception. Caleb’s Brownells videos cover a variety of technical topics — including sight installation, cartridge terminology, dry-firing, gun maintenance, tool selection, and much more. Honestly, you can really learn a lot from Caleb’s videos for Brownells. In this video Caleb Savant shows how to install a pre-fit barrel on a Savage bolt action. Pre-fits come with the chambers pre-cut, and they have a simple barrel nut that makes installation extremely easy.

4. Gundies Nominee — Pew Pew Tactical
Best Gun Reviewer Category

Pew Pew Tactical (PPT) has a good website with useful content, such as a very thorough Review of Nine Long-Range Scopes. Along with its Blog articles, PPT offers dozens of videos on the PPT YouTube Channel. You’ll find many reviews of ARs, military-style rifles, and pistols. But in addition, PPT offers many good product reviews that are honest about product pros AND cons — that’s pretty rare these days. Here is one of PPT’s most informative videos, a 7-minute guide to cleaning and lubricating AR-platform rifles. This shows important details for the bolt and bolt carrier group.

5. Gundies Nominee — MrBigKid
Best Cross-Over Category

MrBigKid is not a typical gun-centric YouTube creator. That’s because his videos focus on two main topics — GUNS and BBQ. Since both those topics — shooting and eating — appeal to a broad audience, MrBigKid’s YouTube channel is growing quickly. When you get tired of the “bang and clang” of guns shooting steel, you can switch to pro-level barbecue methodology shared by a talented cook. Here are TWO of MrBigKid’s recent videos, one featuring a .50 BMG rifle and the other serving up delicious smoked Beef Ribs. Be honest… which video did you click first?

Permalink - Videos, Gear Review, Gunsmithing, News 1 Comment »
December 30th, 2020

Signature Rings — Find True Elevation Change of Inserts

Burris signature rings inserts

Burris Signature Rings with polymer inserts are an excellent product. The inserts allow you to clamp your scope securely without ring marks. Moreover, using the matched offset inserts you can “pre-load” your scope to add additional elevation. This helps keep the scope centered in its elevation range while shooting at long range. Additionally, with a -20 insert set in the front and a +20 insert set in the rear, you may be able to zero at very long ranges without using an angled scope base — and that can save money. (To move your point of impact upwards, you lower the front of the scope relative to the bore axis, while raising the rear of the scope.)

Burris Signature Rings

Insert Elevation Values and Ring Spacing
People are sometimes confused when they employ the Burris inserts. The inset numbers (-10, +10, -20, +20 etc.) refer to hundredths of inch shim values, rather than to MOA. And you need the correct, matched top/bottom pair of inserts to give you the marked thousandth value. Importantly, the actual amount of elevation you get with Burris inserts will depend BOTH on the insert value AND the spacing between ring centers.

Forum member Gunamonth has explained this in our Shooters’ Forum:

Working with Burris Signature Rings
Burris inserts are [marked] in thousandths of an inch, not MOA. To know how many MOA you gain you also need to know the ring spacing. For example, with a -20 thou insert set in the front and a +20 thou insert set in the rear, if the ring spacing is 6″, the elevation change will be approximately +24 MOA upwards.

Here’s how we calculate that. If you have a 2 X 0.020″ “lift” over a distance of 6 inches (i.e. 0.040″ total offset at 0.5 feet) that’s equivalent to 0.080″ “lift” over 12 inches (one foot). There are 300 feet in 100 yards so we multiply 0.080″ X 300 and get 24″ for the total elevation increase at 100 yard. (Note: One inch at 100 yards isn’t exactly a MOA but it’s fairly close.)

Here’s a formula, with all units in inches:

Total Ring Offset
——————– X 3600 = Change @ 100 yards
Ring Spacing

(.020 + .020)
—————– X 3600 = 24 inches at 100 yards
6

NOTE: Using the above formula, the only time the marked insert offset will equal the actual MOA shift is when the center to center ring spacing is 3.60″. Of course, you are not required to use 3.60″ spacing, but if you have a different spacing your elevation “lift” will be more or less than the values on the inserts.

Permalink - Articles, Optics No Comments »
December 30th, 2020

REMAGE Pre-Fit 6mmBR Conversion — How to Do It

Remage Savage Remington Rebarrel Rifleshooter.com 6BR 6mmbr
Barrel nut system allows “Pre-Fit” barrel installation on a Remington action. CLICK photo to zoom.

REMAGE Project Report by Bill, Rifleshooter.com Editor
Installing a new barrel on your Remington 700 (especially without a lathe) may seem like a daunting task, but thanks to companies like McGowen Precision Barrels and Criterion, there are easier alternatives. By adopting a Savage-style barrel nut on a 1 1/16″ thread for a Remington 700 receiver, pre-chambered (aka “pre-fit”) barrels can be easily swapped with just a few hand tools. This system is sometimes called a REMAGE conversion (for “REMington savAGE”). With simple tools a “Pre-fit” 6mmBR-chambered barrel was installed on the author’s Remington action — no machining or lathe-work required.

Remage Savage Remington Rebarrel Rifleshooter.com 6BR 6mmbr

Using a few tools from Brownells: Remington 700 Action Wrench, Barrel Vise, Go and No-Go Gauges, Recoil Lug Alignment Tool, and a Savage Barrel Nut Wrench, I was able to swap the .308 Winchester barrel off of my Remington 700 short action and install the new McGowen pre-fit, pre-chambered barrel, converting it to a tack-driving 6BR (aka 6mmBR Norma).

The existing barrel is simply removed from the action (normally the hardest part) and the new barrel is screwed on with the Go Gauge in place. After headspace is verified with the Go Gauge, the barrel nut is tightened against the action and you are off to the range. It takes all of the machine work out of the barreling process.

Note: Because barrel nut has a slightly larger diameter, some stocks may require minor inletting. Also, if you are shooting fired brass from another rifle with the same chambering, you should FL-size the brass before loading it for your new pre-fit barrel. And always check the set-up with a dummy round loaded to normal cartridge length BEFORE you head to the range. With Pre-Fits, the freebore should be adequate for your cartridge, but always check and adjust your seating depth as needed.

remage 6mm BR 108 berger best group 360

My McGowen Remage barrel looks and shoots great. I’ve written two longer articles that provide greater detail about this project. To learn more about how the barrel was installed, read: Rebarrel a Remington 700 without a lathe: McGowen’s Remage barrel conversion. To see how the rifle performed at the range, read: McGowen Remage Barrel Review: Spoiler Alert — It Shoots!.

Bill has been a serious shooter for over 20 years. A former Marine Corps Sergeant, he’s competed and placed in High Power Rifle, ISPC, USPSA, IDPA, 3-Gun, F-Class, and precision rifle disciplines. In addition to being an NRA-certified firearms instructor and range officer, Bill has hunted big game in North America, South America, and Africa. Bill writes extensively about gunsmithing, precision rifles, and the shooting sports on his Rifleshooter.com website.

Permalink Gear Review, Gunsmithing, Tactical No Comments »