SHOT Show: Cool Tools from Pacific Tool & Gauge
Dave Kiff of Pacific Tool & Gauge showed off some trick products and specialty tools at SHOT Show 2012. First he showed his new Remington bottom metal. Designed originally for a Remington M5 installation, there is also a BDL version that requires minimal stock modification to put in place. This allows you to convert a BDL to accept the reliable AICS detachable box magazines (DBM). Call PT&G at 541-826-5808 and ask about the SHOT Show Special price for AccurateShooter.com readers. (Limited Time Only, subject to availability.)
Micro-Adjustable Reamer Depth Stop
Dave also showed us the handy micrometer-adjustable reamer depth-stop jointly developed by PT&G and gunsmith Nat Lambeth, one of our long-term Forum members. This clever little device give you ultra-precise control over cutting depth. It can save any gunsmith considerable time when cutting chambers, as it assures positive depth control with no guesswork — so you can spend less time measuring incrementally. At right is Nat Lambeth holding the Lambeth-Kiff Adjustable Reamer Stop.
Spiral-Fluted Throat Reamer
Some gunsmiths prefer to start chambers with zero freebore, and then cut the throat in a second step with a throating reamer. You can also use a throating reamer to extend the freebore as needed to shoot a longer type of bullet. PT&G offers an excellent throating reamer with spiral-cut flutes. We have received very positive feedback on this product from respected gunsmiths. One smith raved about the spiral-fluted reamer, saying it “cuts smoothly, with zero chatter, leaving a very fine throat finish”.
- Micro-Adjustable Reamer Stop From PT&G
- Pacific Tool & Gauge Products at MidwayUSA
- New Gunsmithing Tools and Rem Bottom Metal from PT&G
- 6mm 117 grain DTACs–First Look
- SHOT Show Report: New Items from Pacific Tool & Gauge