February 10th, 2018

Chrono Report — Using the LabRadar from Bench and Prone

Bart Sauter Ray Gross LabRadar Benchrest Review Chronograph Bench tripod

Bart Sauter of Barts Custom Bullets owns a LabRadar chronograph. He was curious to see how his loads performed in actual match conditions, so he brought his LabRadar to a match and set it up right on his benchtop. What he learned was quite surprising. For one thing, Bart found that tuning for the best accuracy (in the conditions), was NOT simply a matter of maintaining velocity. Read all about Bart’s experience in this AccurateShooter Forum Thread.

Bart has competed in short range Benchrest matches with the LabRadar on the bench! Bart observed: “The benches were quite close, but the LabRadar was able to pick up my shots even with the other guns going off very close to it. This is a pretty impressive piece of gear.” Bart’s LabRadar unit had no trouble picking up shots when set on the bench, a bit behind the muzzle. Bart noted: “Yes it can go a long way back. You can be a lot farther behind the muzzle then advertised. At home I could get back up to around 8 feet and pick up the bullet. It’s more sensitive about the side distance. I had mine on level 4. You can also point it at your buddy’s target and get his velocity.” Bart set his LabRadar to be triggered by the sound of the gun.

RAV battery pack Amazon.comLong-Life Battery Power
Powering the LabRadar at the range is not a problem. Bart used a portable battery pack that can power the LabRadar for a long time: “I bought a RavPower battery pack from Amazon.com. It was the most powerful compact cell phone charger they had and [it costs about $30.00]. It was able to run the LabRadar for two full days without recharging and still had juice.”

The LabRadar is a pretty expensive piece of kit, but there’s nothing else like it on the market. Bart notes: “The LabRadar itself is about $560.00. The stand is $29.95 for the bench mount and the padded carry case is $39.95. So you’re around $630.00 plus shipping.”

High-Quality Portable Base for LabRadar

Labradar Swivel base

If you want to use your LabRadar when shooting prone, there’s a smart new accessory you should consider buying. Matt Owens, one of our Forum members, has created a new, compact base for the LabRadar that works better than the flat, orange baseplate offered by the manufacturer. This $75 folding base is especially useful when shooting prone (see photo above). Matt, aka “Arkcomatt”, explains: “The folding base will fit in the LabRadar case with the unit. No more having to take apart! Just fold the legs. It takes up less room on the bench and allows you to get it closer to the rifle. It is very stable and holds up very well in high winds.” Forum member Peterson1 agrees: “This is more stable than the Labradar base for my use–off a concrete BR bench, yet takes up less space. Also easier/quicker to set unit up and aimed at target. Never take the unit off for transport in LabRadar case.” ORDER BASE HERE.

LabRadar base swivel base chronograph unit

Forum Member SkiUtah02 uses the base with optional spiked feet: “I bought my base with spikes for the feet to put into the ground. I removed the rubber feet, and screwed in the four spiked feet, [and mounted] an old photography lighting stand swivel head to the base! Worked perfectly. Thanks Matt!”

Full LabRadar Field Test/Review by Ray Gross

If you are considering purchasing a LabRadar Chronograph system, we strongly suggest you read the very thorough and informative LabRadar Review by Ray Gross, past Captain of the USA F-TR team.

Bart Sauter Ray Gross LabRadar Benchrest Review Chronograph Bench tripod

Similar Posts:

Tags: , , , , , ,