Berger Introduces 6.5mm and 6mm 100-grain Bullets
You may have heard rumors about a new 100gr projectile from Berger Bullets. Eric Stecker, Berger’s Master Bulletsmith, confirmed that there will be not one but TWO new 100gr match bullets coming soon from Berger, one in 6mm and one in 6.5mm. These are both boat-tail designs using J4 jackets. Eric explains: “Both these bullets are based on Berger’s proven designs, with standard length ogives and 9° boat-tails. Nothing radical. They are built in response to shooters’ requests to expand our bullet line-up to include new weight options in 6mm and 6.5mm.”
New 100gr 6.5mm Bullet for High Power
Berger’s new 6.5mm 100gr BT Target projectile provides a low-recoil, lighter-weight option for target rifle shooters using the 6.5×47 Lapua, 6.5 Creedmoor, 260 Rem, and 6.5-284 cartridges. The new 6.5mm 100-grainer was created in response to requests from High Power and Across-the-Course shooters for a lighter-recoiling, accurate boat-tail bullet for “short line” work. We predict this bullet may also work well for varmint and small-game hunters. This bullet features a short boat-tail and a “mildly secant” design which should work well either seated into the lands or jumped away from the lands. Bryan Litz says: “it’s definitely not a VLD, but it has a different ogive curve than a typical tangent-ogive bullet.” The shorter length of the 100gr bullet, compared to 140gr-class 6.5mm bullets, should also allow tactical shooters to easily load their ammo to mag length. The calculated BC of the new bullet is 0.370, significantly higher than flat-based 100gr 6.5mm bullets from other manufacturers. A minimum twist rate of 1:10” is recommended for Berger’s hew 6.5mm 100gr Target Bullet.
New 100gr 6mm Match Bullet — More Velocity Than 105/108
Long-range benchresters have had great success with the Berger 108gr match bullet, introduced in 2007. Given the popularity of its tangent-ogive 108, Berger has been developing a shorter, lighter version, which can shoot faster than the 108 in small cartridges such as the 6mmBR, 6mmAR (6-6.5 Grendel), and 6 PPC. The new 6mm 100-grainer will be very similar to the 108. The 100 has the same ogive curve and boat-tail as the 108 but has a shorter OAL and shorter bearing surface (0.368″ vs. 0.409″). A minimum twist rate of 1:8” is recommended for the new 100 — same as for the 108. In a 6BR rifle, the 100-grainer’s reduced bearing surface, combined with reduced mass, should enable Berger’s new 100gr 6mm bullet to fly 50-70 fps faster than the 108 (with charges of equal pressure).
However, there is a trade-off. Being shorter and lighter, the 100-grainer has a lower BC compared to its 108gr big brother. While the Berger 108 has a 0.511 BC, the calculated BC for the 100-grainer is 0.475. That BC difference will show up at long range, but the extra speed of the lighter bullet may enable it to reach a higher, optimal “velocity node” which may deliver superior accuracy in some rifles. We will be testing the new 100-grainer soon. In a 6BR that might max out at 2850 fps with the 108s, we predict the 100gr Berger should run close to 2900 fps. In a 6BR that delivers 2900 fps currently with the 108s, you may see 2950 fps (or more) with the new Berger 100s. The 2900-2950 fps speed range is a well-known “accuracy node” for both 6mm and 6.5mm bullets.