Grendel-based 6mmAR Cartridge for High Power

A full-time lawyer, Robert Whitley is also an avid prone, Highpower, and cross-course shooter. Over the past two years, Robert has pioneered a cartridge for these disciplines (as well as long-range varminting) based on the 6.5mm Grendel necked down to 6mm. Robert calls the cartridge the “6mmAR”.

The 6mmAR cartridge has performed very well in AR-based comp guns, both with shorter bullets loaded to mag length, and 105-107gr bullets single-loaded. Robert has complete info about the 6mmAR on his website, 6mmAR.com, including recommended loads and field test results. Robert has also developed a higher capacity version, with the shoulder blown forward and a shorter neck. He calls this the 6mmAR Turbo. This round can drive 105-108gr bullets in the 2850-2900 range, and it has proven very accurate. It is one of the best options for AR-platform space-gun shooters.

Though making 6mmAR brass from 6.5 Grendel brass is quite straight-forward and simple, Robert receives many questions about forming the brass, so he recently prepared a video. The two-minute video shows how quick and easy the brass-forming process can be:

Robert also builds and sells products for across-the-course shooters, including complete AR uppers, chambered in a variety of calibers, including 6mmAR. Jerry Tierney, 2005 NBRSA 1000-yard champion, has a 6mmAR upper built by Robert and Jerry says the upper “Absolutely shoots great. I love it.” In the past few months, Jerry has broken many NRA senior records with his new 6mmAR-chambered rifle.

CLICK HERE for Feature Article on 6mmAR and Robert Whitley (many photos)

CLICK HERE for 6mmAR LOAD DATA

Similar Posts:

• 6mmAR Case-Forming Video
• Tierney Sets High Power Records
• Whitley's NEW 6mmAR "Turbo" — 105s at 2850+ fps in AR15
• 6mmAR Varminter Field Test
• 6mmAR Turbo: Ultimate AR15 Cartridge?

Tags: 6mmAR, AR15, Case Forming, Turbo