SHOT Show Report: New 3-Way Case Neck Trimmer & Chamferer from Forster

We saw a cool new product at the Forster Products booth. Forster has introduced a new 3-in-1 Carbide cutting tool that works with all existing Forster case trimmers. This unit does three jobs at the same time. It trims the case to length, it puts a 14-degree chamfer on the INSIDE of the neck, AND (last but not least), it cuts a 30-degree chamfer on the OUTSIDE of the neck. It does this all quickly and efficiently — in a matter of a few seconds. We tested the new tool ourselves on a few cases. The tool is solid and well made. The carbide cutting tips do perform a very clean cut. Be aware, however, if you have turned your necks already, you may have to reset the blade positions before you start trimming your brass.

Forster’s CFO, Robert Ruch, demonstrates the 3-in-1 case trimming/chamfering tool in the video below. As you can see, the tool turns very smoothly (no chatter) and the job is finished in a few seconds. The actual cutting time, per case, is just a few second. The tool has an MSRP of $70.00, but we expect it to sell for around $50.00 at major vendors. It can be fitted on Forster trimmers and other hand lathes with a .490″ shaft diameter.

Similar Posts:

• Add 3-Way Case Mouth Cutter to Your Forster Trimmer
• Forster 3-in-1 Case Trimming Tool
• Visit to the Forster Products Factory in Illinois
• Reverse Your Rocket Tool for a Smoother Inside Neck Chamfer
• Tools to Chamfer INSIDE of Case Necks — Various Angle Options

Tags: Brass, Chamfer, Forster, Reloading, Wilson