SHOT Show: New RCBS Reloading Products for 2012
RCBS rolled out some handy new products at SHOT Show 2012. The first item will be welcomed by AR and Service Rifle shooters who reload inexpensive military .223 Rem (5.56×45) and .308 Win (7.62×51) brass. RCBS now has a Primer Pocket Swager Bench Tool that removes military primer pocket crimps quickly and easily. Watch the video and you can see how effortlessly it does the job in just seconds. A hardened steel rod supports the case from the inside allowing the case to float for perfect alignment with the swager head. The RCBS Swager comes complete wtih hardened steel small and large swaging heads and rods to accommodate cases 22-caliber and larger.
We think the RCBS Swager certainly rivals Dillon’s Super Swage 600 which performs the same task. The Dillon employs a vertical (up/down) lever, while the new RCBS Swager uses a horizontal lever arm, with a nice cushioned handle. MSRP on the RCBS Swager is $106.00 compared to $100.95 for the Dillon Super Swage. Either tool will pay for itself by allowing you to reload inexpensive milsurp brass.
RCBS Adds Universal Shell-Holder to Trim Pro
RCBS has also updated its popular Trim Pro® case trimmer with the addition of a spring-loaded universal shell holder. This has spring-loaded jaws that can hold anything from a 17 Fireball case up to the large magnums. No more fiddling around with cartridge-specific shell-holders — you just snap your cases (of any size) in and out of the spring-loaded jaws. The system works well and the jaws hold cases securely during the trimming process. Again, watch the video to see the system in action.
Pistol Bullet-Feeder Kit
Last but not least, RCBS has released an inexpensive, gravity-fed bullet feeding system. Much cheaper and simpler than a motor-driven feeder, this system, which combines a tube with a special die, reliably drops pistol bullets, one by one, as you operate your progressive press. Importantly, this manual bullet-feeder works with jacketed, plated, cast or swaged lead bullets. (Some other bullet feeders cannot handle lead bullets). This device should be a major time-saver for those who load a lot of pistol rounds.
This Editor was sufficiently impressed with the gravity-fed bullet feeder that I ordered one for my own RCBS Pro 2000 Progressive. Note, however, the RCBS feeders work on Dillon and Hornady presses also — these Bullet Feeder Kits are designed to be used with ANY 7/8″-14 threaded progressive press. Each clear tube holds 20-25 bullets depending on weight and profile. Two bullet tubes are included with each unit. Extra bullet tubes sold separately. MSRP is just $36.00.
RCBS 2012 Rebate — $10 Off $50.00 Order
RCBS has a “Get Green” Rebate Offer that runs through December 31, 2012. When you purchase $50.00 of any RCBS product, you qualify for a $10.00 mail-in rebate. Then, earn a bonus $5.00 mail-in rebate when you purchase one of the following: 5 sleeves of Federal Premium or CCI primers, 1 pound of Alliant Powder, 1 box of Speer Bullets, 1 bag of Federal Premium brass. There is also a $50.00 Rebate on a purchase of $300.00 worth of RCBS Products.
CLICK HERE for RCBS 2012 Rebate Form
Similar Posts:
- SHOT Show Report: New RCBS Bullet Feeder for Progressives
- UltimateReloader.com Tests RCBS Progressive with Bullet Feeder
- Powerful Progressive — Dillon RL-1100 with 8 Stations
- SHOT Show Report: New RCBS Bullet Feeder & Chronograph
- Progressive Presses — Video Showcase of Six Machines
Tags: 2012, ATK, bullet, Bullet Feeder, Military Crimp, Primer Swager, Progressive Press, RCBS, Rebate, Shellholder, Spring-loaded, Trim Pro, Universal
If they wanted to improve upon Dillon’s design, they should have added a feature to swage away the flash hole burr instead of squishing it back into the flash hole the way Dillon’s does. I suspect this one will do the same thing…
That bullet feeder looks awesome!! Especially considering RCBS’ electric feeder is $500 and Hornady’s Ammo Plant one is about $300. Definitely will get one when they come out!