|
|
January 18th, 2011
Report by C.D. Michel
In a dramatic ruling giving gun owners a win in an National Rifle Association / California Rifle and Pistol (CRPA) Foundation lawsuit, this morning Fresno Superior Court Judge Jeffrey Hamilton ruled that AB 962, the hotly contested statute that would have banned mail order ammunition sales and required all purchases of so-called “handgun ammunition” to be registered, was unconstitutionally vague on its face.
The trial Court enjoined enforcement of the statute, so mail order ammunition sales to California can continue unabated, and ammunition sales need not be registered under the law.
The lawsuit was prompted in part by the many objections and questions raised by confused police, ammunition purchasers, and sellers about what ammunition is covered by the new laws created by AB 962. In a highly unusual move that reflects growing law enforcement opposition to ineffective gun control laws, Tehama County Sheriff Clay Parker is the lead plaintiff in the lawsuit. Other plaintiffs include the CRPA Foundation, Herb Bauer Sporting Goods, ammunition shipper Able’s Ammo, collectible ammunition shipper RTG Sporting Collectibles, and individual Steven Stonecipher. Mendocino Sheriff Tom Allman also supported the lawsuit.
The ruling comes just days before the portion of the law that bans mail order sales of so-called “handgun ammunition” was set to take effect on February 1, 2011. The lawsuit, Parker v. California, is funded exclusively by the NRA and the CRPA Foundation. If it had gone into effect, AB 962 would have imposed burdensome and ill-conceived restrictions on the sales of ammunition. AB 962 required that “handgun ammunition” be stored out of the reach of customers, that ammunition vendors collect ammunition sales registration information and thumb-prints from purchasers, and conduct transactions face-to-face for all deliveries and transfers of “handgun ammunition.” The lawsuit successfully sought the declaration from the Court that the statute was unconstitutional, and successfully sought the injunctive relief prohibiting law enforcement from enforcing the new laws.
Trial Court Agrees that Ammo Ban is Unconstitutionally Vague
The lawsuit alleged, and the Court agreed, that AB 962 is unconstitutionally vague on its face because it fails to provide sufficient legal notice of what ammunition cartridges are “principally for use in a handgun,” and thus is considered “handgun ammunition” that is regulated under AB 962. It is practically impossible, both for those subject to the law and for those who must enforce it, to determine whether any of the thousands of different types of ammunition cartridges that can be used in handguns are actually “principally for use in” or used more often in, a handgun. The proportional usage of any given cartridge is impossible to determine, and in any event changes with market demands.
Decision Will Probably Be Appealed but Law Will Still Be Suspended
Constitutional vagueness challenges to state laws are extremely difficult to win, particularly in California firearms litigation, so this success is particularly noteworthy. Even so, an appeal by the State is likely, but the Court’s Order enjoining enforcement of the law is effective immediately, regardless [of the possibility of appeal]. Editor’s Note: An injunction against the application of AB 962s provision will remain in effect until such time as it is vacated by an appellate court. But for the time being, mail-order ammo sales to California can proceed without restriction, as if AB 962 were never signed into law. Until a higher court rules otherwise, the contested provisions of AB 962 are rendered a nullity.
This report provided by C.D. Michel Michel of Michel & Associates, counsel for the NRA in the litigation challenging the California mail-order ammo ban.
January 18th, 2011
Media Day at the Boulder City, Nevada range was a blast — literally. We had a chance to sample some big .338 Lapua Magnum rifles from Barrett and Sako. The recoil on the Sako TRG42 was epic, as it lacked a muzzle brake, and the front sandbag did nothing to tame rearward movement. We’ll provide more info on the TRG42 (and its new folding stock) later this week.

New Tikka T3 Sporter — Master Sporter Reborn
Tikka unveiled an interesting new T3 Sporter, fitted out in a handsome laminated position stock. This seems to be the successor to Tikka’s popular (but long since discontinued) Master Sporter series. We only hope Beretta, Tikka’s parent company, will eventually offer a wider selection of calibers — right now Beretta only plans to sell .223 Rem and 22-250 versions in the USA.
New Tikka T3 Sporter

MRAD is Impressive — and Brutally Expensive
Barrett’s new MRAD “adaptible” rifle was an impressive beast — as it should be at $6000.00 per unit. It did display some very clever engineering that allows a user to switch barrels and even change calibers with no gunsmithing. Check out the video for a review of the many unique features of the MRAD.
Crosman’s Computer-Controlled Airgun
Perhaps the most innovative (or at least technologically advanced) rifle on display wasn’t officially a “firearm” at all. Crosman’s new Benjamin Rogue, pneumatic varmint rifle actually has a microprocessor-controlled “fire control” system. Yes this state-of-the-art airgun actually has an internal computer that monitors the available air pressure, and sets the output level according to the bullet weight and desired velocity. This is no Daisy B-B gun — the Rogue is big and bulky. But it also delivers the hitting power of a 38 Special, all without a single kernel of gunpowder. Crosman’s Rogue will launch a 145gr polymer-tipped Nosler bullet at 850 fps. Just run the numbers and you’ll find the Rogue delivers as much terminal energy as many centerfire pistol cartridges.
Polymer Cartridge Casings from PCP
A Florida-based company, PCP Ammunition, unveiled a truly revolutionary product — polymer-cased ammo. The “cartridges” have a metal rim/base section (like shotgun shells) but nearly all the cartridge body is a tan-colored high-strength polymer. No, this product won’t do reloders much good, but it could be a huge “hit” with the military, as a polymer case is at least 25% lighter than brass. PCP Reps claimed that PCP’s plastic-bodied ammo can withstand loads that would be considered “full presure” in conventional brass. Stay tuned for further updates.

January 18th, 2011
During Media Day we kept our eyes out for new multi-gun gear, since 3-Gun Competition is becoming so popular. At the Surefire booth we ran into 3-Gun Ace Barry Dueck (pronouned “Duke”). Barry demonstrated the side-mounted iron sights he produces for AR-type carbines (actually these sights can work on any rifle that has suitable rails).
Running a combination of a magnified, 1-5X Leupold on top with iron sight mouted at a 45-degree angle on the sides, Dueck can rapidly transition from optics to irons. The top scope works great for longer shots, but Dueck finds he can engage close targets more quickly (and accurately) with the iron sights. While some other 3-gunners run a magnified optic on top and a red dot sight on the side, the use of two (2) glass optics puts a 3-gun competitor in a different division. Dueck’s Rapid Transition Sight (RTS) System, allows him to compete in the single-optics classes. The side-mounted irons are also more foolproof than any electronic sight, as Dueck explains in the video below.
January 17th, 2011
SHOT Show kicks off tomorrow, Tuesday, January 18th. Today your Editor is fortunate enough to be attending the Media Day event, hosted at the Boulder Rifle & Pistol Club, outside Las Vegas.
At Media Day, we’ll be inspecting and testing new firearms to be introduced later this week at SHOT Show. This is a rare opportunity to handle and shoot a wide selection of new firearms, and also to test new optics and other accessories. Stay tuned to the Daily Bulletin for regular updates on our Media Day discoveries, plus all the latest products on display at SHOT Show. We will be interviewing many firearms industry notables, and we’ll try to get photos (and video clips) of the most interesting and innovative new products.
The NSSF, which operates the SHOT Show, also has its own YouTube Channel now. There you can a variety of professional-produced short videos every day for the next week. To watch the NSSF Videos, go to www.YouTube.com/nssfshotshow.

January 17th, 2011
For quite some time Whidden Gunworks has offered an excellent V-Block designed for Remington 700, Rem Model 7, or XP100/ XR100 actions. Whidden’s machined aluminum V-Block allows you to use multiple barreled actions in the same stock (provided action length and screw positions are the same).
Now Savage owners can benefit from a V-Block set-up. Whidden Gunworks has started selling a new V-Block especially designed for Savage actions. Models are offered for the Savage Target action, Palma action, and Savage Short and Long Actions. You can’t really tell from the photo (at left), but the V-Block does have a milled recess for the Savage recoil lug.
Whidden’s V-Blocks have slightly raised ridges the run parallel to the barrel. These help provide a solid grip on the action, so you normally do NOT need to skim-bed the V-Block. Because V-Blocks have a flat bottom and straight sides, it is easy to inlet a stock to take a V-Block — nothing’s tricky. Whidden’s Savage V-Blocks are made of 6061-T6 aluminum, surface milled for epoxy adhesion, and individually inspected. John Whidden believes that a properly installed V-Block “is easier to install, simpler to inlet, more accurate, and more versatile than any action-mounting system available.” We don’t know about the accuracy part, but a V-Block can certainly help you leverage your stock investment by running multiple barreled actions in the same stock.
Right now, Whidden’s Savage V-Blocks are in short supply so you should order directly through Whidden Gunworks, by calling (229) 686-1911. You can order Whidden’s Rem-type V-Blocks for $113.95 through Creedmoor Sports or $109.95 through Brownells.com.
January 17th, 2011
The makers of Cerakote have a cool interactive web application that lets you preview various colors and camo finishes on your firearm. Cerakote’s color preview page is similar to what car-makers are doing these days. For example, you can go to the Ford website and click through nine available colors for a 2011 Mustang GT. Hey, if it works for cars, it should work for guns, right?

Mix and Match 33 Colors with Virtual Gun Coater
NIC Industries, the company that produces Cerakote ceramic firearms finish, offers an interactive “colorizer” web app. This Cerakote Virtual Gun Coater lets you select from 33 solid and camo colors to “paint” the slide and frame of a Glock pistol. Mix and match slide and frame colors to your heart’s content. Available colors include digital camo, titanium, red orange (law enforcement only), coyote tan, and mil spec green. These are all real colors you can actually order. You can even e-mail your buddy a photo of your favorite color scheme. Give it a try!
Story by Edlongrange, Research Assistant.
January 16th, 2011
Most of our readers know that AccurateShooter.com completed a major site upgrade late last year. But perhaps you haven’t seen all the new features yet. The site has been completely over-hauled and improved, with a larger format, more photos, better search engine, easier navigation, and database-served articles (to help you find related content faster).
Explore our Updated Website
Visit www.accurateshooter.com, to check out our new home page. There you’ll find a selection of popular articles (that change with each new page visit), a “feed” of our latest Daily Bulletin items, plus links to videos, free targets, free Classified Ads, and of course our popular Cartridge Guides.
New Featured Tubegun Story with Eliseo Video Interview
We just released our latest Featured Gun of the Week Story. This article spotlights a .308 Win tubegun built with an Eliseo (Competition Machine) RTS Chassis. Mark LaFevers, the gun’s owner, assembled the rifle himself and chambered the barrel. And get this — Mark even built his own bipod, bag-riders, scope rings, and advanced muzzle brake. The story is a “must read” for all Tubegunners and .308 Win fans. CLICK HERE to read the story. For a sample, watch the video below, which features an interview with Tubegun guru Gary Eliseo.
This new Tubegun article illustrates some of the cool features of our upgraded website. First, we’ve embedded thumbnail links to related articles within the text. In addition, in the right column you’ll find a set of links to related stories. Just click on the link (as shown by the arrows) to real a new story on a similar topic. This makes it is easy for readers to find interesting, relevant content. All articles are now searchable through a fast search engine. You’ll find a search window at the upper right hand corner of every page in the updated website.

January 15th, 2011
Zeiss has just introduced its latest spotting scope, the Dialyt 18-45x65mm Compact Field Spotter. We like the design and we think there’s a place in the spotting scope market for a simple straight-tube spotter with razor-sharp, ultra-premium glass. High-end spotting scopes have become increasingly large and heavy over the years as the optics-makers have chased ever-greater levels of brightness and magnification. But a hunter or tactical shooter doesn’t want to hump 8 pounds of glass up and down mountains. The Dialyt (“Die-Ah-Lite”) weighs a mere 2.6 lbs. (1.2 kg) and is just 15.5 inches long.

Easy to Use, Easy to Carry
The Dialyt is easy to use — twist the eyepiece to zoom and rotate the front objective to focus. Originally designed for European Alpine hunters, the new rubber-armored ZEISS Dialyt 18-45×65 Field Spotter is built tough for field use. This should appeal to hunters and tactical shooters. And unlike older-style draw-tube scopes, the straight-tube Dialyt is dustproof and fully waterproof (rated to 400 mbar).
About the size of a thermos bottle, the 2.6-pound Dialyt 18-45×65 fits easily into a backpack and, if necessary, can be rested on a pack for stabilization at higher magnification. This spotter also has threads for a tripod or monopod.
The Dialyt 18-45×65’s variable eyepiece provides a wide field of view at low magnification and plenty of magnification up top. This compact spotter also features multilayer coatings and high light transmission for good performance at dawn and dusk — something important for hunters.

January 15th, 2011
Here’s good news for .338 LM, .416 CheyTac, and .50 BMG Shooters — No longer will you need to make double throws with a manual powder measure, just to get enough powder to fill your case. Redding Reloading has introduced a NEW high-capacity powder measure that can pump out up to 140 grains of powder with a single throw. The new Redding LR-1000 measure features an all new-metering chamber capable of producing accurate powder drops of up to 140 grains.
Consider that a .338 Lapua Magnum typically uses about 100 grains of powder. With Redding’s new LR-1000 measure,you can fill the case with one throw and still stay within the optimal (middle third) “sweet spot” of the measure’s capacity. This will yield better results, as Redding explains: “[Large Cartridge Shooters] have been forced to resort to double powder drops or working at the very outer limits of a measure’s capacity to throw the needed quantity of powder for these big cases. Neither practice represents the best solution.”

LR-1000 Large Capacity Measure Specs
The LR-1000 features cast iron construction with a hard chromed rotor and cutting edge. Note that the hemispherical cup at the base of the metering chamber reduces bridging with extruded powders, even with small throw volumes. The LR-1000 ships complete with jumbo-sized powder reservoir, powder baffle and a zero-backlash micrometer. For more info, visit Redding-Reloading.com, specifically the Media Center Page (click on “2011 Press Kit”).
January 14th, 2011
For 2011 Nosler will introduce no less than 17 new NoslerCustom® brass offerings. Most of the 17 new brass varieties are for large hunting cartridge types, not widely used. However, target shooters may be interested in Nosler’s new 7mm SAUM (Rem Short Action Ultra Mag) and 7mm RUM (Rem Ultra Mag) brass. The 7mm SAUM is becoming popular in F-Class circles. With slightly less capacity (and a longer neck) than the 7mm WSM, the 7mm SAUM is a good choice for shooting the popular 180gr High-BC bullets from Berger and Sierra. Tactical shooters will appreciate Nosler’s new .338 RUM and .338 Lapua Magnum brass. It’s nice to have additional brass choices for these big cartridge types.

NoslerCustom Brass is Weight-Sorted, DeBurred and Chamfered
Notably, Nosler does extra finishing steps on its cartridge brass, based on the notion that: “Life’s too short to prep your own brass”. As with other NoslerCustom cartridge brass, the 17 new varieties will come “semi-prepped”. Flash holes are trued and case mouths are deburred and chamfered. According to Nosler: “Every piece is hand-inspected, and weight-sorted within +/- .5 grains” (and then packaged by weight groupings).

All the new types of Nosler brass will bear the “Nosler” headstamp although it is rumored that some of Nosler’s cartridge brass is made for it by other highly respected companies, both domestic and foreign. As to the 17 new varieties, we can’t identify which cartridge types are produced in-house and which will be out-sourced. Overall, our experience with NoslerCustom brass has been good, though in 22-250 and .308 Win it is not quite as strong or long-lasting as Lapua brass.
|