Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









January 13th, 2023

SHOT Show 2023 Kicks Off Next Week in Las Vegas

Shot show 2022 las vegas venetian expo media day at range

SHOT Show 2023 is three days away. The 2023 event kicks off with Industry Day at the Range on Monday, January 16, 2023. Then the indoor event runs Tuesday the 17th through Friday the 20th. There will be over 2600 exhibitors from all 50 states and dozens of nations. This year continues with SHOT Show running in TWO large exhibit halls — the Venetian Expo and the relatively new Caesars Forum. Total exhibit space for the 2023 show in these two venues is more than 800,000 net square feet — equivalent to more than 18 acres (about 14 football fields). And with these twin halls, SHOT Show boasts 13.9 miles of aisles!

SHOT Show FACTS AND FIGURES

Shot show 2022 las vegas venetian expo media day at range– The “SHOT” in SHOT® Show stands for Shooting, Hunting, and Outdoor Trade.

— SHOT Show 2023 will have 800,000 square feet of Exhibit Space with 13.9 MILES of Aisles. The floor space is equivalent to 14 football fields.

— 2023 SHOT Show will have more than 2,600 exhibitors, including the Suppliers Showcase.

— More than 55,000 professionals in the shooting, hunting, outdoors and law enforcement industry are expected to attend, along with 2000+ media members.

— Firearms and ammunition are a $7.1 billion industry. The total economic impact of the gun/ammo/hunting industry is more than $63 billion, which supports more than 342,000 jobs.

— SHOT Show generates millions of dollars in revenue to fund NSSF programs including Firearms Training programs, Project ChildSafe, National Shooting Sports Month, and the +ONE mentoring initiative.

— This is the 45th Annual SHOT Show and the 24th in Las Vegas. The first SHOT Show was in 1979 in St. Louis, Missouri. Las Vegas has been home to the show continuously since 2010. However, the 2021 SHOT Show was virtual due to the pandemic.

Shot show 2022 las vegas venetian expo media day at range

Shot Show 2023 Digital trackerShot Show 2023 Mobile App

For more INFO visit SHOTShow.org and read the SHOT Show Blog. There will also be daily updates on the official SHOT Show Facebook Page, YouTube Channel, and Instagram Page. See a full list of all 2023 exhibitors via the SHOT Show Digital Tracker website. Visitors to SHOT Show should definitely download the SHOT Show 2023 Mobile App.

SHOT Show is a Massive Event — 800,000 Square Feet of Products

Based on current bookings, SHOT Show 2023 will encompass over 800,000 net square feet. That’s the equivalent of 14 football fields. There should be over 2600 exhibitors this year. CLICK HERE to search for exhibitor booths by company name. View the 2023 SHOT Show layout here:

SHOT Show 2022 full post registration
CLICK HERE for full floor-plan with Venetian Level 1, Venetian Level 2, Caesars Forum, and Supplier Showcase. From that page, click tabs for each location. When on a page, zoom to see individual booth numbers. Mouse over any booth to see the exhibitor (example below for Vista Outdoor in booth 11838).

SHOT Show 2022 full post registration

Permalink - Articles, New Product, News No Comments »
January 13th, 2023

On Friday the 13th — How to Avoid Train Wrecks at Matches

train wreck Bryan Litz shooting tips ballistics friday 13 13th

Today is Friday the 13th. For those of you who are superstitious — maybe you should avoid climbing ladders, playing the stock market, or using power tools today.

When it comes to shooting, there are many things that shooters chalk up to “bad luck”. In fact, most of these instances of “bad fortune” just come from a failure to anticipate problems. When you have a major, critical problem at a shooting match, i.e. a “train wreck”, this can be the end of your weekend. In this article, Ballistics Guru Bryan Litz talks about “train wrecks” and how to avoid them, even if you are shooting on Friday the 13th. As Bryan told us: “I don’t believe in superstition — we make our own luck!”

How to Avoid “Train Wrecks” In Competition

In any shooting competition, you must try to avoid major screw-ups that can ruin your day (or your match). In this article, past F-TR National Mid-Range and Long Range Champion Bryan Litz talks about “Train Wrecks”, i.e. those big disasters (such as equipment failures) that can ruin a whole match. Bryan illustrates the types of “train wrecks” that commonly befall competitors, and he explains how to avoid these “unmitigated disasters”.

Urban Dictionary “Train Wreck” Definition: “A total @#$&! disaster … the kind that makes you want to shake your head.”

train wreck Bryan Litz shooting tips ballisticsTrain Wrecks (and How to Avoid Them)
by Bryan Litz of Applied Ballistics LLC.

Success in long range competition depends on many things. Those who aspire to be competitive are usually detail-oriented, and focused on all the small things that might give them an edge. Unfortunately it’s common for shooters lose sight of the big picture — missing the forest for the trees, so to speak.

Consistency is one of the universal principles of successful shooting. The tournament champion is the shooter with the highest average performance over several days, often times not winning a single match. While you can win tournaments without an isolated stellar performance, you cannot win tournaments if you have a single train wreck performance. And this is why it’s important for the detail-oriented shooter to keep an eye out for potential “big picture” problems that can derail the train of success!

Train wrecks can be defined differently by shooters of various skill levels and categories. Anything from problems causing a miss, to problems causing a 3/4-MOA shift in wind zero can manifest as a train wreck, depending on the kind of shooting you’re doing.

Below is a list of common Shooting Match Train Wrecks, and suggestions for avoiding them.

1. Cross-Firing. The fastest and most common way to destroy your score (and any hopes of winning a tournament) is to cross-fire. The cure is obviously basic awareness of your target number on each shot, but you can stack the odds in your favor if you’re smart. For sling shooters, establish your Natural Point of Aim (NPA) and monitor that it doesn’t shift during your course of fire. If you’re doing this right, you’ll always come back on your target naturally, without deliberately checking each time. You should be doing this anyway, but avoiding cross-fires is another incentive for monitoring this important fundamental. In F-Class shooting, pay attention to how the rifle recoils, and where the crosshairs settle. If the crosshairs always settle to the right, either make an adjustment to your bipod, hold, or simply make sure to move back each shot. Also consider your scope. Running super high magnification can leave the number board out of the scope’s field view. That can really increase the risk of cross-firing.

2. Equipment Failure. There are a wide variety of equipment failures you may encounter at a match, from loose sight fasteners, to broken bipods, to high-round-count barrels that that suddenly “go south” (just to mention a few possibilities). Mechanical components can and do fail. The best policy is to put some thought into what the critical failure points are, monitor wear of these parts, and have spares ready. This is where an ounce of prevention can prevent a ton of train wreck. On this note, if you like running hot loads, consider whether that extra 20 fps is worth blowing up a bullet (10 points), sticking a bolt (DNF), or worse yet, causing injury to yourself or someone nearby.

train wreck Bryan Litz shooting tips ballistics

[Editor’s Note: The 2016 F-Class Nationals will employ electronic targets so conventional pit duties won’t be required. However, the following advice does apply for matches with conventional targets.]

3. Scoring/Pit Malfunction. Although not related to your shooting technique, doing things to insure you get at least fair treatment from your scorer and pit puller is a good idea. Try to meet the others on your target so they can associate a face with the shooter for whom they’re pulling. If you learn your scorer is a Democrat, it’s probably best not to tell Obama jokes before you go for record. If your pit puller is elderly, it may be unwise to shoot very rapidly and risk a shot being missed (by the pit worker), or having to call for a mark. Slowing down a second or two between shots might prevent a 5-minute delay and possibly an undeserved miss.

train wreck Bryan Litz shooting tips ballistics4. Wind Issues. Tricky winds derail many trains. A lot can be written about wind strategies, but here’s a simple tip about how to take the edge off a worse case scenario. You don’t have to start blazing away on the command of “Commence fire”. If the wind is blowing like a bastard when your time starts, just wait! You’re allotted 30 minutes to fire your string in long range slow fire. With average pit service, it might take you 10 minutes if you hustle, less in F-Class. Point being, you have about three times longer than you need. So let everyone else shoot through the storm and look for a window (or windows) of time which are not so adverse. Of course this is a risk, conditions might get worse if you wait. This is where judgment comes in. Just know you have options for managing time and keep an eye on the clock. Saving rounds in a slow fire match is a costly and embarrassing train wreck.

5. Mind Your Physical Health. While traveling for shooting matches, most shooters break their normal patterns of diet, sleep, alcohol consumption, etc. These disruptions to the norm can have detrimental effects on your body and your ability to shoot and even think clearly. If you’re used to an indoor job and eating salads in air-conditioned break rooms and you travel to a week-long rifle match which keeps you on your feet all day in 90-degree heat and high humidity, while eating greasy restaurant food, drinking beer and getting little sleep, then you might as well plan on daily train wrecks. If the match is four hours away, rather than leaving at 3:00 am and drinking five cups of coffee on the morning drive, arrive the night before and get a good night’s sleep.”

Keep focused on the important stuff. You never want to lose sight of the big picture. Keep the important, common sense things in mind as well as the minutia of meplat trimming, weighing powder to the kernel, and cleaning your barrel ’til it’s squeaky clean. Remember, all the little enhancements can’t make up for one big train wreck!

Permalink - Articles, Competition No Comments »
January 13th, 2023

Ultrasonic Case Cleaning — Determining the Optimal Dwell Time

cartridge brass case ultrasonic liquid cleaning dwell time brownells

If you read our lengthy article on Ultrasonic Case Cleaning by Jason Baney, you’ve seen the remarkable results that can be achieved with this method, as shown by the photo above. Ultrasonic cleaning has many advantages over traditional tumbling methods of case cleaning. There is no dust or media residue to remove from the brass, and when done right, the cases come out clean and shiny, inside and out, even the primer pockets.

In its Benchtalk Archives, Brownell’s has an excellent article discussing Ultrasonic Case Cleaning. Brownell’s staff compares results, with measured dwell times from 5 to 75 minutes, using both Mpro-7 and HCS 200 cleaning solutions. Tests are performed with once-fired and 5X-fired Tactical 20 (Tac20) cases, as well as once-fired .260 Rem Cases. The article also compares the results from ultrasonic cleaning vs. tumbling in walnut media. Below are Brownell’s results for Tac20 cases with the HCS 200 (non-acidic solution). Go to Brownell’s article for MPro7 results and Rem 260 results.

HCS 200 Cleaning Solution Test

Procedure — Solution was de-gassed for 15 minutes, then 63 Tac20 cases were placed in a single layer, in stainless steel mesh basket. The temperature of the starting solution was 102° F. When the cases were removed the temperature was 110° F.

Once-Fired Tactical Twenty Cases (HCS 200) — Observations
5 minutes: The exterior of the cases are not significantly brighter/cleaner. The primer pockets and case interiors are still dirty.
10 minutes: Exterior of the cases are brighter. 70% of the cases show some degree of cleaning of the primer pockets. Little difference seen inside the case, but case mouths are cleaner.
15 minutes: Case brightness is about the same. Still only 70% of the primer pockets are clean, but a larger portion of each is cleaner. A Q-tip swabbed inside the cases shows that carbon/powder residues are loosening up.
20 minutes: Case exteriors are brightening up. 80-85% of the primer pockets are about 90% clean. The insides of the cases and case mouths are cleaner.
25 minutes: Cases are brighter/cleaner than even new brass. 80-85% of the cases have almost completely clean primer pockets. The inside of the cases are 80-90% clean.
30 minutes: The insides of the cases and case mouths appear to be completely clean. 87% of the primer pockets are virtually 100% clean. 13% of the cases had stubborn primer pocket residue that could not be completely removed.
60 minutes: Eight cases (13%) were placed in the tank for another 30 minutes to try to remove the remaining residue in their primer pockets. Six out of the eight cases were completely clean.

Five-Times Fired Tac20 Cases — Observations
30 minutes: Based on the above observations, I didn’t begin to observe these 5-time fired cases until after 30 minutes: The exterior cases are bright/clean. Brighter than new cases. The primer pockets on 75% of the cases are 75% clean. The remaining cases had primer pockets that were only 25% clean. The inside of the cases appear to be clean.
65 minutes: 25% of the primer pockets were 95% clean, 25% of the primer pockets were 90% clean, 25% of the primer pockets were 85% clean; and 25% were 80% clean.
75 minutes: 75% of the primer pockets were 90% clean.

How Does Ultrasonic Cleaning Work?
The Brownell’s Benchtalk article explains: “Ultrasonic cleaning uses high-frequency sound waves (generally between 20-80 kHz) to remove a variety of contaminants from objects immersed in a liquid. The result of these high-frequency sound waves is a process called cavitation. These high frequency bursts of ultrasonic energy produce a three-dimensional wave of alternating positive and negative pressure areas as the sound wave passes through the solution. During negative pressure, microscopic cavitation bubbles form and will continue to grown until they reach resonant size. As the positive sound wave passes, the pressure rises rapidly and implodes these tiny bubbles. Before these minuscule bubbles implode they store a tremendous amount of energy. These bubbles can be as hot as 10,000 degrees and have as much as 50,000 lbs per square inch of pressure. This sounds alarming, but you have to remember that these bubbles are microscopic in nature and pose no harm to anything, unless you are a carbon /powder residue deposit on a cartridge case!

When this cavitation bubble implodes near your brass case, it transforms the bubble into a jet about 1/10th of its size. This jet of energy can travel as fast as 400 km/hour. At 43 kHz, as is the frequency for our L & R HCS 200 ultrasonic cleaner, this is happening 43,000 times per second. This micro-burst of extreme energy is responsible for removing contaminants from the surface of your cartridge brass. Ultrasonic cleaning can reach into crevices and inaccessible areas and remove surface debris that can’t be cleaned by any other process.”

Photos and quotes © Brownells®, Inc. All Rights Reserved, Used with Permission.

Permalink Bullets, Brass, Ammo, Reloading, Tech Tip No Comments »